PDR IR-E1

Entry-Level SMD/BGA Rework Station

Advanced Focused IR component heating
Quartz IR PCB preheating with up to 3 zones
18”/450mm PCB Capacity
Precision PCB handling
Non-Contact Component Temperature Sensing
Wire TC PCB Temperature Sensing
Handheld Pickup Tool
Advanced Automatic Thermal Process Control

Request A Quotation

Technical Data

Bench Area: 1400mm (w) x 600mm (d)
Weight: 65kg
Warranty: 2 years
Voltage Frequency: 208-240 volts 50/60Hz, up to 3.5KW
Top Heater Power: 150W Focused Infrared up to Ø70mm Spot
PCB Preheater Power: 3250 Dark IR
PCB Preheater Heating Area Size: 14.1 x 9.4”/360 x 240mm
Number of PCB Preheater Zones: 3 Zones
Spot Size Included: F700 (Ø 25-70mm)
Component Temperature Sensing: Non-Contact IR Sensor
PCB Temperature Sensing: Wire TC
Max PCB Size: 12 x 18”/300 x 450mm
Max Component Size: 2.1 x 2.1”/55 x 55mm
Min Component Size: 01005
Number of TC Channels: 4
Operating Software: PDR’s Thermoactive Software Suite suitable for Windows 10+
Certifications: CE, UKCA, NFPA 79

Applications

Desoldering, placement and soldering of all types of surface mounted devices (SMD) BGA, QFN, LED, CSP, 0201, 01005

Accessories

PDR Lens Attachments

AC-F150	F150 (Ø4 - 18mm spot size)
AC-F200	F200 (Ø10 - 28mm spot size)
AC-F400	F400 (Ø12 - 35mm spot size)

Spares Kits

AC02009	Consumables kit (lamp+socket, gel flux, roll 25mm black tape, vac cup, springs, O rings)
AC02008	Consumables kit (lamp+socket, gel flux x 2, roll 25mm black tape, vac cup, springs, O rings, Lens No1, Cold Mirror)

PDR Reball Kit

PDRRB01	PDR BGA Reball Set (BGA foil & frame, paste foil & frame, hi-temp esd nest, squeegee blade)
PDRB02	PDR BGA Reball Additional Component Set

Other

SP05029	Laser Alignment Tool
SC020	Controller & Sensor Calibration Check Kit
SP05016	PCB IR Sensor - CS Type (Ø 7-12mm spotsize)
SP05017	PCB Sensor Contact Probe

FAQs

Why is it called Focused Infrared and how is it different from normal IR?

Is PDR's IR Technology Safe? Do we need eye protection?

Will the IR beam burn my fingers?

How does PDR's Focused IR work?

What are the advantages of PDR's focused IR over a Convection Rework System?

How long does a system typically last?

What is the largest BGA a PDR Rework system can handle?

What are the smallest components a PDR Rework system can handle?

Can you rework reflective components with Focused IR?

Why is the PDR Top Heater rated at only 150w?

What are Lens Attachments and what size do I need?

Will close adjacent parts reflow?

What is the smallest PCB you can rework?

What is the Max size PCB a PDR Rework system can handle?

What is the maximum PCB thickness?

How long does an IR Bulb Last?

What pickup tips are available with a PDR Rework system?